Methods for Handling Dust Between Protective Film and Screen

2023/6/22 Viewed：

Many friends are curious and tear open a corner of the protective film on their phone or LCD screen, only to find that some dust has fallen. After putting on the protective film, it doesn't look good no matter what. Tear off the protective film again, and some wipe it with their hands. Unexpectedly, the oil on his hands was also stuck to the protective film, getting dirtier and dirtier. Of course, his mood was even more unpleasant!
Don't worry, you can use transparent tape to make a new protective film. However, some people find it a bit troublesome, and some phones have just been bought for a while, and the film is still very new.
Another trick is to use transparent tape to remove the dust and oil from the contaminated protective film. Bring transparent tape, gently tear off the protective film, stick a small piece of transparent tape on the adhesive side, and when you peel it off, you will see that the dust has decreased significantly. Stick it a few more times, and there will be no dirt on the basic protective film.
Here's some advice for everyone:
1. Do not tear off the protective film casually, as falling dust is difficult to handle.
Even if handled properly, the adhesion of the protective film will not be as good as before. And it will leave creases.

Go Back: Print

Next：On the Identification and Use of Protective Films