Bottom Supporting Membrane

Main Technical Parameters

(Enterprise Standard, Strictly Follow Customer Requirements If Needed)

Appearance	The Surface Should be Smooth and Flat, Without Cracks, Holes, Obvious Impurities, Bubbles, Etc
Burst Resistance	≥1300kpa
Wear Resistance	≥ 10000 Times, No Rupture Problem (With a Load of 5Kg)
180° Peel Strength	≥3.0N/cm
Stickiness Holding Time（h）	≤ 2mm (Load Capacity 500g, 12h)
Elongation at Break	≥20%
Tensile Force	≥280N